Ae86 manual steering rack

The driver side is a one piece wrap around design similar to the factory bushing, while the Passenger side is a two piece that adapts from the AE86 mount to the smaller tube diameter of the manual or AW11 manual rack. Both bushings are made from 90A Urethane for long life and solid hold. The passenger side bushing does not fit power racks. New alloy cased steering rack for AE turns end to end ( standard)-Available For Right Hand Drive and Left Hand Drive Cars-Available with Track Rods, Tie Rods and Boots-Available with Extra Steering Angle Spacer.  · From my experience, AE86 and KE70 manual racks are interchangable. But the KE70 rack has one less tooth and 10mm less throw (so slightly less lock). And from a friend who did a PS to manual steering conversion, there was also a difference in steering columns. I can't remember the details on this issue though, but it sounds like you're onto it anyway.

1x AW11 MR2 Manual Steering Rack. 2x AE86 Power Steering Outer Tie Rods. 2x AE86 Power Steering Inner Tie Rods. 1x T3 Adapter Bushing. 2x AE86 Power Steering Bracket (both left and right side - RH bracket will fit the T3 Adapter Bushing, while left side needs no mods since they are proven to fit). So we opted to update our manual rack with a Quaife Quick Steering Ratio (QSR) rack-and-pinion kit made specifically for left-hand-drive AE86 Corollas. The kit replaces the internals of the. Quaife AW11 / AE86 Quick steering rack. We suggest using this quick rack with NON-ps knuckles as the lack of leverage from using a quick rack and and shortened knuckles may be a bit too much for street or canyon use. You still want to be able to control your vehicle, after all. ***AW11 generally in stock stateside.

From my experience, AE86 and KE70 manual racks are interchangable. But the KE70 rack has one less tooth and 10mm less throw (so slightly less lock). And from a friend who did a PS to manual steering conversion, there was also a difference in steering columns. I can't remember the details on this issue though, but it sounds like you're onto it anyway. 1x AW11 MR2 Manual Steering Rack. 2x AE86 Power Steering Outer Tie Rods. 2x AE86 Power Steering Inner Tie Rods. 1x T3 Adapter Bushing. 2x AE86 Power Steering Bracket (both left and right side - RH bracket will fit the T3 Adapter Bushing, while left side needs no mods since they are proven to fit). New alloy cased steering rack for AE turns end to end ( standard)-Available For Right Hand Drive and Left Hand Drive Cars-Available with Track Rods, Tie Rods and Boots-Available with Extra Steering Angle Spacer.